Home Blog Page 471

Samsung Galaxy Tab A9+ 5G gets listed on Google Play Console, key specs with renders leaked.

Samsung’s midrange Galaxy Tab A9 will launch on October 5 in India, and we already saw it listed on the Google Play Console last week. There was no mention of whether this would be a single device launch or a series launch. Samsung’s upcoming tablet device was revealed in a recent leak. A new listing details the Galaxy Tab A9+, which may launch simultaneously with the regular Tab A9.

According to the certification, the Galaxy Tab A9+ 5G is powered by Snapdragon 695 5G, which again confirms its mid-range status. Based on a 6nm manufacturing process, the chipset is equipped with two Cortex-A78 P-Cores (2.2GHz) and six Cortex-A55 E-Cores (1.8GHz).

It also features a landscape view display with Full-HD+ (1920*1200p) resolution and 240 DPI (density per inch). Additionally, the certification mentions that this model will have 4 GB of RAM and Android 13.

It can also be seen from the renders that the device would feature a single rear camera. In the middle-top bezel, there is a camera.

Earlier leaks have indicated that the Galaxy Tab A9 will be powered by Helio G99 chip and feature an HD+ display (1340*800p). Other aspects of both devices are unknown at this time.

Samsung will make the Galaxy Tab A9 series official on October 5, so all the mysteries will be solved.

Here is the first look at the upcoming flagship Xiaomi 14 Pro ahead of official launch.

Digital Chat Station shared a schematic of what appeared to be the Xiaomi 14 series back in July. A report by TechGoing showcases the design of the Xiaomi 14 Pro via case images. The latest leak for the 14 Pro reveals the following.

Xiaomi 14 Pro:

It appears that the Xiaomi 14 Pro is a refinement of the Xiaomi 13 Pro in terms of its design. The Xiaomi 14 Pro is rumored to feature a quad-curved display. The leaked case images do not appear to reveal the display design clearly.

In addition to an earpiece and speaker outlet on the top bezel, the 14 Pro’s top edge appears to have additional outlets for a speaker, an IR blaster, and a noise-canceling microphone. There is a speaker grille, a microphone, and a USB-C port on the opposite end of the device. It is likely that the SIM slot is at the bottom of the device, but it cannot be seen in the images.

There are no buttons on the left edge. The volume and power buttons are located on the right side. At the bottom of the right edge, there is a connector that resembles a pogo pin, but its purpose is unclear. According to some reports, the device will have a titanium alloy frame.

A design evolution from the Xiaomi 13 Pro is evident on the rear of the Xiaomi 14 Pro. It retains the square camera island with three cameras and an LED flash unit. In the case images, the top-right module, which appears to have internal sensors, might actually house the LED flash and bear the Leica branding. The Xiaomi 13 Pro, on the other hand, had the LED flash and the Leica logo in the bottom-right module.

Xiaomi upcoming budget phone Redmi 13C press renders leaked features 50MP triple cameras.

Earlier this month, Redmi made the Note 13 series available in China. Globally, the mid-range lineup should also launch this year or early next year. Redmi may also launch a budget smartphone before that happens Redmi 13C. As the successor to last year’s Redmi 12C, the handset is expected to feature an improved design and cameras.

Several high-resolution renders of the upcoming Redmi 13C have been shared by MySmartPrice. The rear view of the handset is somewhat similar to that of the Note 13 series. In a squircle-shaped module, it gets a triple camera setup. In the camera module, it is noted that the smartphone will have a 50MP primary camera. On the right edge of the device, we can see the power button and volume keys.

On the front, the U-shaped notch and thick bezels give away that this is a budget smartphone. However, the device features a 3.5mm headphone jack, a feature you don’t often see on smartphones nowadays. There is also a speaker grille, a charging port, and a microphone on the device. In addition to the color options – Light Green, Black, and Blue – the outlet shared renders of the Redmi 13C.

Currently, no one knows the handset’s specifications. We expect the successor to the Redmi 12C to be unveiled in a similar manner. In the coming days, more details about the handset should become available.

Alleged Realme GT5 Pro renders leaked online will arrive with dedicated telephoto lens.

A new flagship phone from Realme will have a telephoto camera sensor. It was speculated that the handset could be the Realme GT 5 Pro. Weibo has posted an alleged render of Realme GT 5 Pro’s rear design. Realme shared a teaser image showing the camera module design.

Realme GT 5 Pro is seen in Black, but other colors may be available at launch. On the right edge of the phone are the volume rocker and power button. There is a circular module on the back of the Realme GT 5 Pro that houses three camera sensors and an LED flash. Additionally, we see a periscope/telephoto sensor.

Renders do not show the front of the device, but there will be a selfie camera cut-out and narrow bezels. The Realme GT 5 Pro’s alleged render matches the brand’s teaser image from a few days ago.

Specs:

DCS reports that the Realme GT 5 Pro will feature an OLED panel with curved edges. The exact screen size is unknown, but it is expected to support a 2K resolution, ultra-high frequency dimming, and at least 120Hz refresh rate. For better durability, the device is expected to feature a metal middle frame. The device is also dust- and water-resistant.

Realme GT5 Pro will be equipped with a Snapdragon 8 Gen 3 chipset, 24 GB of RAM, and 1 TB of storage. It is expected to support 100W wired charging and 50W wireless charging.

There will be a 64MP OmniVision OV64B main camera with 3x optical zoom on the rear of the device. This device is said to be equipped with an ultra-wide lens and Sony IMX9-series primary camera. A new leak also claims that the GT 5 Pro has an X-axis linear motor and a massive vapor chamber heat dissipation unit measuring 10,000mm2. According to a recent leak, the device in China will be priced at 4000 Yuan (Rs.46,300/-).

Apple to bring this much needed feature with the new iPhone 16 series.

iPhone 15 Pro and iPhone 15 Pro Max unveiled a couple of weeks ago feature Action Button, which replaces the mute switch. According to MacRumors, the iPhone 16 series will also come with a capacitive button, internally named “Capture Button” and codenamed “Project Nova.”

There will be a capacitive Capture Button on the iPhone 15’s right-side frame, where the Power Button is located, but lower, near the mmWave cutout. Because the Capture Button is placed where the mmWave cutout is, it is moved below the volume buttons to the left-side frame.

Although its purpose is unclear, the Capture Button should work like the Home Button on the iPhone SE, mimicking the press of a physical button. According to the source, the Capture Button will also have a force sensor. In addition, unlike the Action Button, which is only available on the iPhone 15 Pro and iPhone 15 Pro Max, the Capture Button will be available on all iPhone 16 models.

A fallback device without the Capture Button has also been created by Apple as a backup.

The iPhone 16 series will also feature a capacitive Action Button called “Project Atlas.” Like the Capture Button, it will provide haptic feedback using strain gauges and reluctance motors.

Moreover, the iPhone 16 is expected to feature a redesigned camera bump and vertical camera arrangement, while the iPhone 16 Pro and iPhone 16 Pro Max are expected to feature 6.3″ and 6.9″ screens, respectively. They are 0.2″ larger than their predecessors.

It’s worth keeping in mind that all this information is based on pre-production models, and since the iPhone 16 lineup’s design isn’t finalized, there’s always a chance we’ll get a completely different product at launch.

Here are the reasons for overheating in the iPhone 15 Pro series.

You can’t have missed the reports that certain iPhone 15 Pro series phones have been found to overheat. People have been complaining about hot-running Pro models since they launched.

Now, analyst Ming-Chi Kuo has released a note, concluding that the A17 Pro chipset isn’t to blame for the overheating but rather compromises Apple made in the design of the thermal system. The A17 Pro is built on TSMC’s advanced new 3nm node, which is very efficient, but apparently still outputs more heat than the phone can dissipate.

In this case, Apple’s efforts to make the new iPhone Pro models lighter are to blame. Due to the higher heat conductivity of titanium, Apple had to reduce the heat dissipation area, resulting in worse heat management.

Throttling issues will likely be addressed by Apple with a software update, which can manage but not fix the issue. By limiting a phone’s performance and power requirements, a software update can prevent overheating.

It isn’t entirely clear why only some of the phones are affected by Kuo’s theory.

Hisense introduces Hisense U7K, Hisense U6K & E7K Smart TVs in India features upto 4K resolution QLED display.

In India, Hisense has launched three new smart TV models, the U7K, U6K, and E7K. Prices for the TV models start at Rs 24,999 and the company offers an additional one-year warranty for a limited time. With a starting price of Rs 59,999, the Hisense U7K offers a QLED display, Dolby Vision, and Dolby Atmos. Here are the prices, features, and specifications of Hisense U7K, U6K, and E7K TV models in India.

Hisense U7K:

With the Hisense U7K, you’ll get Mini LED technology for better visuals, along with Quantum Dot color technology, which promises an expansive and lifelike colour spectrum. With Full Array Local Dimming Pro, the TV supports multiple HDR formats, including HDR 10+, HDR 10, and HLG.

Additionally, it has several gaming features, including ALLM, e-ARC, and AMD FreeSync. The U7K features Dolby Vision and Dolby Atmos for enhanced audio and visuals. Hi-View Engine provides users with a cinematic experience.

Hisense U6K & E7K:

The Hisense U6K QLED TV features a 120Hz HRR panel and Game Mode Plus, which includes ALLM and e-ARC. Additional features include HI-view Engine, Dolby Vision, and Dolby Atmos. Google TV integration and AI Sports Mode are also included.

With a 60Hz refresh rate, ALLM, and e-ARC, the Hisense E7K offers Game Mode Plus. Additionally, it features Dolby Vision with Dolby Atmos, AI Picture technology, and Quantum Dot color technology.

Pricing:

The Hisense U7K starts at Rs 59,999. Amazon offers the U7K in four screen sizes – 55 inches, 65 inches, 75 inches, and 85 inches. It starts at Rs 1,39,999 for the 85-inch model.

Amazon and Flipkart will sell the 43-inch U6K model for Rs 26,990. A 55-inch model will cost Rs 45,990, while a 65-inch model will cost Rs 62,990. Offline retail stores such as Croma and Reliance Digital will sell the models.

The Hisense E7K will be available in 43-inch, 50-inch, 55-inch, and 65-inch screen sizes. The 43-inch model starts at Rs 24,999 and goes up to Rs 49,999 for the 65-inch model. Flipkart will be the only retailer selling the E7K model.

In addition to the standard two-year warranty, the company is offering an additional one-year warranty on TVs between October 1 and November 15.

OnePlus upcoming budget tab OnePlus Pad Go detailed specs leaked ahead of Oct 6 launch.

On Oct. 6, the OnePlus Pad Go will be officially unveiled in India. The tablet will also be available on Amazon and Flipkart in India in addition to OnePlus India’s website. In the Chinese market, the same tablet may be called Oppo Pad Air 2. The Pad Go’s specifications are gradually being revealed by OnePlus in the lead-up to its launch. Several previously undisclosed details about the tablet have been shared by a tipster.

OnePlus Pad Go:

The OnePlus Pad Go will feature an 11.35-inch LCD display with a 2.4K resolution and a 7:5 aspect ratio. The device comes with 120Hz refresh rate support. It will be equipped with quad speakers powered by Dolby Atmos.

OnePlus Pad Go will be equipped with a MediaTek G99 SoC and will support 4G LTE connectivity. Therefore, the company may offer the device with Wi-Fi only or Wi-Fi + cellular.

There will be 8 GB of RAM and 256 GB of native storage on the OnePlus Pad Go. MicroSD cards can be used to expand the storage. It features an 8MP rear camera and an 8MP selfie shooter.

Android 13 will be running on ColorOS 13.2 on the tablet. The device packs an 8000 mAh battery with no word about the fast charging.

With a slightly larger screen than the OnePlus Pad, the Pad Go weighs 523g as opposed to 552g for the OnePlus Pad.

OnePlus will also launch the OnePlus Fold in multiple markets in October. On Oct. 19, OnePlus will unveil its first foldable phone, according to a recent leak.

Upcoming OnePlus Ace 3 aka OnePlus 12R specs leaked to launch along with OnePlus 12.

We can expect OnePlus’ flagship phone, the OnePlus 12, to be unveiled in China by the end of the year. A new Ace-branded phone may be announced in October or November in China or alongside the OnePlus 12 in December. According to the leaker’s Weibo post today, the device will be known as the OnePlus Ace 3. The device’s key specifications were also reiterated by him.

Specs:

This tipster claims that the OnePlus Ace 3 will feature the Snapdragon 8 Gen 2 chipset. After the OnePlus 11 5G and the Ace 2 Pro for China, this will be the third SD8G2 phone from OnePlus.

According to the tipster, the Ace 3 will feature a metal middle frame and a 5,500mAh battery that supports 100W charging. There will be a Sony IMX709 telephoto camera with a 2x optical zoom on the rear of the phone.

He previously leaked that the Ace 3 will come with a 6.74-inch curved OLED display. In addition to 1.5K resolution and 120Hz refresh rate, it will support high-frequency dimming as well. There will be three cameras on its back: a 50MP Sony IMX890 main camera, an 8MP OmniVision OV8D10 ultra-wide lens, and a 32MP telephoto lens. However, it is expected to come with up to 16GB or 24GB of LPDDR5x RAM and 512GB or 1TB of UFS 4.0 storage.

The OnePlus Ace 3 is also expected to be released outside of China, most likely in India. OnePlus 12R is likely to be rebranded outside of China as the OnePlus 12S.

ASUS ROG Phone 8 Ultimate key specs leaked to arrive with top-end specs.

IMEI data for the ASUS ROG Phone 8 series was spotted last month. The ROG Phone 8 Ultimate has surfaced on GeekBench, which reveals some of its key specifications.

The ROG Phone 8 Ultimate is ASUS’ flagship gaming smartphone. According to the GeekBench listing, the ROG Phone 8 Ultimate has the ASUS_AI2401_A model number. According to the benchmark, the device features an octa-core processor that has a 1+5+2 CPU architecture, which may be Qualcomm’s Snapdragon 8 Gen 3 SoC.

It’s not surprising that the ASUS ROG Phone 8 series has a high-end processor. There will be at least one variant of this chipset with 16GB of RAM. According to the listing, the ROG Phone 8 Ultimate will run Android 14 out of the box. Additionally, the ROG Phone 8 Ultimate scored 2,213 points in the single-core test and 7,408 points in the multi-core test.

Currently, ROG Phone 8 is still a while away from launch. Details like their design, specs, and pricing are still unclear. As with the ROG Phone 7 series, ASUS is expected to launch this device in the first half of next year. Stay tuned for more updates on these devices.

4,765FansLike
753FollowersFollow
3,066FollowersFollow
206FollowersFollow